Weil-McLain - Electric Baseboard Heater

Below are all the different types of Weil-McLain. Select the device of your choice, to download the manual

Contents

Therma Trim MODEL TT HYDRONIC BASEBOARD ASSEMBLY INSTRUCTIONS Position back paneis Back panels must be positioned correctly to accommodate accessories as shown below Attach back panei to waii Screw or nail into wall studs at top and bottom No closer than 3 inches from end of panel Bottom of panel must never be lower than the surface of the finished floor or carpet Add shim as shown if necessary Shim if needed Finished floor surface or carpeting Install brackets Position brackets evenly along length of panel approximately every 2 feet and slide down so bottom tab enters bottom slot in back panel Cut element When a shorter length is needed Measure from the female end for the required length b Cut glide rails wi ...